I4f Click 4mm Spc Flooring Anti-Scratch Waterproof Floor Tile From Changzhou

• After-sales Service: 15 Years
• Warranty: 15 Years
• Material: PVC
• Style: Modern
• Function: Anti-Slip, Moisture Proof, Wear-Resistant, Waterproof, Thermal Insulation
• Thickness: 4mm
• Model NO.: YH8801-01
• Lead Hardness: Hard
• Surface Treatment: Deep Embossed
• Pattern: Wood Grain
• Color: Multi-Color
• State: Block
• Usage: Household, Commercial
• Laminated Flooring: Good for High Traffic Area
• Building Material: Hotels Shopping Mall Hospital School
• Engineered Flooring: Real Wood Bevel Available
• Vinyl Floor: 100% Waterproof
• Vinyl Tile: Anti-Bacterial
• Lvt Floor: Antique Wood Texture
• Lvt Dry Back: First Choice for DIY
• Wear Layer: 0.3mm 0.5mm 0.7mm
• Size: 150X1220mm, 180X1220mm, 228X1220mm, 228X1524mm
• Transport Package: by Sea
• Specification: 1220*228mm
• Trademark: Yuhe
• Origin: China

Product Description

Color	Grey, Yellow, Brown
Size	150x1220mm, 180x1220mm, 228x1220mm, 228x1524mm
Thickness	4.0mm, 5.0mm,6.0mm
Finish	Standard UV Coating, Ceramic Coating, Antibacterial Coating
Texture	Granite, Slate, Deep Embossed, EIR, Crystal
Wear Layer	8mil, 12mil, 20mil
Installation	Click System
Underlayment	Optional (EVA, IXPE, Cork)

SPC Floor Manufacturing Process:

Nowadays, SPC flooring is becoming more and more popular and it is gradually replacing many of the floors we used before, such as LVT CLICK Flooring, and WPC Flooring. Let's take a look at the production process of SPC flooring.

Step One: Mixing and Heating

Put Raw material (PVC resin powder, stone powder, plasticizer, stabilizer, carbon black, etc) together, Using 100% virgin material

Step Two:  Extruding 

Semi-finished plank (rigid core) to settle basic thickness

Step Three: Hot pressing

 Press Wear layer + Decor films (Texture and peeling strength)+ Semi-Finished plank together

Step Four: Cutting 

Whole plank (High efficiency & accuracy) into pieces, the size can meet different kinds of requests

Step Five: UV Coating

Make surface resistant & durable for scratch and stain, we have ceramic bead coating, diamond coating, and easy cleaning coating (just using water can clean the dirty place made by color pen) for choice

Step Six: Standing time

To make SPC more stable, each process under hot temperature will be standing, following the international EN standard

Step Seven: Slotting and Grooving

Make click system easy to install, our staff have over 10-years -experience grooving technique

Step Eight: Inspection & Packaging & Warehousing

Installation Guide:
1. Begin installing in the left corner of the room. Underlayment should be installed at the same

time as the floor.

2. Cut off the long side tongue (end and edge) of the first plank and position the cut edges

adjacent to the wall.

3. Fit planks with the cut-off sides against the walls making sure to leave an expansion space

of ¼" between the plank and the wall. Use of spacers is recommended.

4. Turn the long side of the first plank of the second row into the secured panel of the first row

at an angle, lower into place, and be sure the planks click together.

5. Slide the third plank together horizontally. Slightly lift the plank and push the short side

joint down with your thumb moving from the inner corner out until you hear it click. Knock

gently on the short end click with the palm of your hand or tapping block to ensure they are

closed.

6. Connect the planks of the first two rows on the short sides

7. Make sure the first two rows are perfectly straight and make sure the expansion space is at

least ¼ inch (6mm)

8. Continue row by row until you reach the other side of the room checking that each joint

sufficiently locked before moving on to the next plank. Press down gently on top of each

short end joint to ensure a good connection.

9. To fit the last row, lay a plank on top of the previous row. With the plank against the wall,

mark a line down the length of the plank and cut accordingly.

10. Once you have finished laying & inspecting the floor, you may install baseboards (attached to

the wall, never to the floor)

11. Undercut doorjambs where the floor meets a threshold or doorway. To make the right cut,

turn a plank upside down and place it on the floor up to the door frame. Place a handsaw flat

against the plank and cut through the frame. Remove the cut out and secure the plank on the

long side